User`s manual

6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
________________________________________________________________________
6-14
6.5.6 Reset runtime
Figure 6-21
Reset runtime
After replacement of the lamp, the serial number of the new lamp has to be entered.
The command Reset runtime displays the dialog to enter the serial number.
To enter the serial number of the new lamp, proceed as follows:
• Use the cursor key to highlight Reset runtime.
• Press Enter to select.
The following dialog is displayed:
Figure 6-22
dialog to enter the serial number of a new lamp
• Use the cursor keys to highlight the input field.
• Use the numeric keys on the RCU to enter the serial number of the new lamp.
• Click Accept to activate the serial number.