User`s manual

6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
________________________________________________________________________
6-12
The results of the optimization adjustments are saved individually for both lamps. Therefore after changing the
active lamp, no optimization procedure is required, the lamp will automatically be brought into the former de-
termined best position.
However, when replacing the lamp, it is recommended to select Lamp Optimization, since the
new lamp has different parameters and therefore has to be adjusted anew.
6.5.4 History
Use this command to see the list of serial numbers and the current runtime of the lamps
Figure 6-17
Lamps menu, History
Proceed as follows to view the lamp history:
• Use the cursor key to highlight History
• Press Enter to select.
A dialog is displayed which shows the serial numbers and runtimes of the employed lamps.
Figure 6-18
dialog showing the history of the lamps of the projector