User`s manual
Table Of Contents
- Preliminary Remarks
- Abbreviated summary
- Design and functions
- Operation
- Controlling
- Menu structure
- Maintenance and servicing
- Technical data
- OverView mDG50-DL
- Overview mDR50-DL
- OverView mDR+50-DL
- OverView cDG67-DL
- OverView cDR67-DL
- OverView cDR+67-DL
- OverView cDG80-DL
- OverView cDR+80-DL
- Electrical data illumination unit 120 W
- Optical data illumination unit 120 W, projection unit XGA resolution
- Optical data illumination unit 120 W, projection unit SXGA resolution
- Optical data illumination unit 120 W, projection unit SXGA+ resolution
- Electrical data illumination unit 100 W
- Optical data illumination unit 100 W, projection unit XGA resolution
- Optical data illumination unit 100 W, projection unit SXGA resolution
- Optical data illumination unit 100 W, projection unit SXGA+ resolution
- Optical data illumination unit 200 W, projection unit XGA resolution
- Use of 3200K filter cartridge
- Operating conditions
- Interfaces
- Scope of delivery
- Consumables
- Spare parts
- Controller
- Addresses
- Trouble shooting
- Configuring notes
6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
__________________________________________________________________________
6-8
Starting point: in all three operation modes source 1 is selected.
Source 1 / DVI 1 Source 2 / DVI 2 Manual mode Auto Preferencemode Auto Switch mode
Selected source:
will remain source
1 during all com-
binations!
Selected source:
will remain source 1
during all combinations!
Selected source (prior-
ity):
will toggle between
source 1 and source 2
source 1 source 1 source 1 <--> source 2
not connected not connected background background background,
priority = source 1
not connected gets connected background switch to source 2 switch to source 2,
priority = source 2
not connected present background display source 2 display source 2,
priority = source 2
not connected gets disconnected background switch to background switch to background,
priority = source 2
gets connected not connected switch to source1 switch to source 1 switch to source 1,
priority = source 1
gets connected gets connected switch to source1 switch to source1 switch to source 1,
priority = source 1
gets connected present switch to source1 switch to source1 display source 2,
priority = source 2
gets connected gets disconnected switch to source1 switch to source1 switch to source 1,
priority = source 1
present not connected display source 1 display source 1 display source 1,
priority = source 1
present gets connected display source 1 display source 1 display source 1,
priority = source 1
present present display source 1 display source 1 display source 1,
priority = source 1
present gets disconnected display source 1 display source 1 display source 1,
priority = source 1
gets disconnected not connected switch to back-
ground
switch to background switch to background,
priority = source 1
gets disconnected gets connected switch to back-
ground
switch to source 2 switch to source 2,
priority = source 2
gets disconnected present switch to back-
ground
display source 2 display source 2,
priority = source 2
gets disconnected gets disconnected switch to back-
ground
switch to background switch to background,
priority = source1
In Auto Switch mode, as soon as the source is switched, priority is also switched!