User`s manual
Table Of Contents
- Preliminary Remarks
- Abbreviated summary
- Design and functions
- Operation
- Controlling
- Menu structure
- Maintenance and servicing
- Technical data
- OverView mDG50-DL
- Overview mDR50-DL
- OverView mDR+50-DL
- OverView cDG67-DL
- OverView cDR67-DL
- OverView cDR+67-DL
- OverView cDG80-DL
- OverView cDR+80-DL
- Electrical data illumination unit 120 W
- Optical data illumination unit 120 W, projection unit XGA resolution
- Optical data illumination unit 120 W, projection unit SXGA resolution
- Optical data illumination unit 120 W, projection unit SXGA+ resolution
- Electrical data illumination unit 100 W
- Optical data illumination unit 100 W, projection unit XGA resolution
- Optical data illumination unit 100 W, projection unit SXGA resolution
- Optical data illumination unit 100 W, projection unit SXGA+ resolution
- Optical data illumination unit 200 W, projection unit XGA resolution
- Use of 3200K filter cartridge
- Operating conditions
- Interfaces
- Scope of delivery
- Consumables
- Spare parts
- Controller
- Addresses
- Trouble shooting
- Configuring notes
6. Menu structure
Barco - OverView D series - Doc-3353-2 - user's manual - Revision 05 - Aug 2005
__________________________________________________________________________
6-5
6.4.4 Startup Screen
Figure 6-5
Operation menu, Startup screen
This command switches on or off the Startup screen. If switched on, the projector shows the identification infor-
mation when starting up.
• Use the cursor keys to highlight Startup screen
• Press ENTER to select.
• The currently selected status is indicated with a white dot.
• Use the cursor keys to highlight the desired behavior
• Press Enter to select.
6.4.5 Language
Figure 6-6
Operation menu, Language
The list of selectable languages for the menus is depending on the software of the projector. For OVERVIEW D,
currently English is the only language.
The active language is indicated with a white dot.
Languages which are not available are grayed out.