User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 10-3
Maintenance Area
The floor space for OverView cDG67-DL is calculated from the basic area of the structure. A
maintenance area must be provided behind each OverView cDG67-DL over the complete width.
This area must be permanently accessible. The exact regulations for such a maintenance area can
be obtained from the specifications for working premises.
Figure 10-1
Linear and polygonal set-up of OverView cDG67-DL
(All dimensions measured in millimeters!)
With regards to maintenance area, please note that there may be laws concerning
safety standards in your country!
The OVERVIEW CDG67-DL Display Wall can have a linear or curved arrangement. Standard
curved configurations are available with with angles of 3, 5, and 8 degrees.
Other angles on request!