User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 7-14
7.3.6 Replaci ng the Filter Pad
The filter pad must be replaced regularly. The operating period of a filter pad depends on the qual-
ity of the supplied air.
 Switch the projector in Standby mode.
 Switch off power by pressing
OFF.
Switch off the equipment before replacing the filter pad in order to avoid severe
contamination of OverView cDG67-DL
 Lift the cover of the filter pad slightly and remove it.
Figure 7-10
Removing the cover and the filter pad
 Remove the filter pad.
 Insert the new filter pad as indicated on its frame.
 Insert the cover of the filter pad and press it slightly down.
 Switch on power by pressing
ON.