User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 6-15
The countdown time can be set in a dialog box in a range from 180 to 3600 seconds (default value
= 300). The Timer can also be disabled.
To enable the timer and to set the countdown time proceed as follows:
 User the cursor key to highlight
Standby timer.
 Press
Enter to select
A dialog box is displayed:
Standby timer
Enabled
Disabled
Countdown to
sec
0
Figure 6-25
dialog box to control the Standby timer
The current status is indicated by a selected radio button.
To select the other status, proceed as follows:
 Use the cursor key to highlight the desired status.
 Press
Enter to select.
To change the
countdown time, proceed as follows:
 Use the cursor keys to browse to the input field
 Enter the desired value by means of the numeric keys on the RCU.
 Press
Enter to activate