User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 6-12
6.6 Status Menu
This menu allows checking and controlling the projector identification parameters as well as set-
ting some operation features.
6.6.1 Identificat ion
OverView DG
Operation
Identification
4
Over Temp Protection
Automatic startup
4
4
Standby timer..
Lamps Brightness
Installation
Status
Figure 6-18
Status menu, Identification
To view the projector identification, proceed as follows:
 Use the cursor key to highlight
Identification.
 Press
Enter to select.
A submenu with the entries
Short and Long is opened
 Use the cursor key to highlight the desired status information.
 Press
Enter to select.
If
Short is selected, the following dialog is displayed which shows type, address, software version,
baudrate, orientation, and the serial numbers of the projector:
Identification
Type OverView DG
Address 1
Software 00.31
RS232 baudrate 9600
Orientation Front / Ceiling
Serial Number IU 5107951
Serial Number PU 5107998
Figure 6-19
projector identification short: dialog box showing the projector properties
This dialog is also shown during starting up the projector if operation|startup
screen is enabled.