User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 5-4
5.3 Project or Address
The projector's address may be set to any value between 0 and 255 (see
'projector address' in
chapter
'Service mode). When the address is set, the projector can be controlled now by the RCU
for addresses between 0 and 9.
The projector can also be controlled by computer, e.g. IBM PC (or compatible), Apple MAC, etc.
for addresses between 0 and 255.
A projector will respond to a RCU set to an address of '0' regardless of what address
is set in the projector itself.
5.3.1 Using th e RCU
The RCU is default programmed with address 0, 'zero address'. With that 'zero address' pro-
grammed into the RCU, every projector, without exception will listen to the commands given by
this
RCU. If it is necessary to control a specific projector, than enter the projector address into the
RCU (only when that address is between 0 and 9). The projector with the corresponding address
will listen to that specific
RCU.
5.3.2 Display ing a Projector Address
Press the ADDRESS key (recessed key on the RCU) with a pencil.
To continue using the
RCU with that specific address, it is necessary to enter the same address with
the
digit buttons (address between 0 and 9) within 5 seconds after pushing the address key. For
example if the
Address key displays projector address 003, then press "3" digit button on the RCU
to set the RCU's address to match the projector's address. Do not press 003 digits. This will address
the remote control to '0' and control all projectors in the room.
But if you want to enter an address with two digits, e.g. 53, then you have to press “053”, other-
wise the projector will accept the first digit (5) as his address.
If the address is not entered within 5 seconds, the
RCU returns to its default address (zero address)
and control all projectors in the room.
5.3.3 How to Program an Address into the RCU?
Press the ADDRESS key (recessed key on the RCU) with a pencil and enter the address with the
digit buttons within 5 seconds after pushing the
address key. That address can be any digit be-
tween 0 and 9.