User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 4-2
4.1 Cabling
All necessary cables are connected to the O
VERVIEW CDG67-DL projection module.
4.1.1 Power
Check the power rating on your outlet before connecting the Atlas67C4-DLP Units
to the wall outlet or to a power strip. Contact your facilities manager or a qualified
electrician if you are not sure what type of power is supplied to your building.
The devices are designed to operate with single-phase power systems having a
grounded neutral conductor. To reduce the risk of electrical shock, do not plug
into any other type of power system.
4.1.2 Data
The projection units of an OVERVIEW CDG67-DL Display Wall are connected to the graphic cards
of a Barco Controller. The projector as a DVI interface.