User`s manual

doc-3331-2 OverView cDG67-DL (August 2003) 3-8
3.6 Operat ion Elements
Control Elements
The control elements of OverView cDG67-DL are located on the rear of the system. They include
3 switches and in total 6 LEDs.
O
I
On/Res.
Top
Bottom
Standby
L1
L2
Fan
Service Active
Lamp
Operation
Power
1
23
4
5
6
Figure 3-7
rear side: control elements
Item Refers to Function
1 Power switch Rocker switch, Power ON (up) or OFF (down)
2 Standby switch and Power LED also used for the acknowledge of errors (reset)
3 Active lamp selection switch Rocker switch,
top: select lamp top
bottom: select lamp bottom
4 Lamp door bottom LED indicates if the lamp door may be opened or not
5 Lamp door top LED indicates if the lamp door may be opened or not
6 Status LEDs
(L1, L2, Fan)
Informs about the operation status of the two
lamps and the fan
The operation via the control elements on the rear side (manual user interface) is
intended for servicing purposes only!
The switches and LEDs are described in chapter
Manual User Interface