Operator`s manual

64 BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
Hbase = Base value for Input Raster Horizontal Position.
Vcur = Current Input Raster Vertical Position value. Value can be –16 to 15 of Vertical Base value
Vbase = Base value for Input Raster Vertical Position.
Example: IRSPBP 1 I V 10 (Increments the input 1 vertical position by 10.)
IRSPBP? 3 (Returns the horizontal and vertical current value and base positions.)
Command:
ISYNCBP in n
Description: Adjusts the Input Sync selection of the specified source.
Parameters: in - input [1-4]
n - Mode; [0|1|2], Sog|Comp|H/V
Query:
ISYNCBP? in
Returns the Input Sync Mode of the specified source in the format:
=n
Example: ISYNCBP 1 0 (Sets input 1 to expect SOG on the input channel.)
ISYNCBP? (Returns the Input Sync Mode.)
Command:
LCKBP? in
Description: Video Lock Inquiry Command for the current source.
Parameters: in - input [1-4]
Returns: The input video match status, horizontal lock status, and vertical lock status.
=m h v
where m=0 for Not Locked, 1 for Locked/Matched, 2 for Locked/Mismatched.
h=0 for horizontal not locked, 1 for horizontal locked
v=0 for vertical not locked, 1 for vertical locked
Example: LCKBP? 1 (Returns the input video, h and v lock status of the input source 1.)
Command:
LOADRBP
Description: Places unit into loader mode. This mode is used to perform field upgrades
Parameters: None.
Example: LOADRBP (Puts unit into loader mode.)
Command:
OCRECFBP n
Description: Select the Output Resolution when no input to system.
Parameters: n - Output Resolution [1-3]
1 = SVGA, 800x600
2 = XGA, 1024x768
3 = SXGA, 1280x1024
Query:
OCRECFBP?
Returns the Output Resolution in the format:
=n
Example: OCRECFBP 2 (Select output format to be XGA.)
OCRECFBP? (Returns output format resolution.)
Command:
OFRATEBP n
Description: Adjusts the Output Frame Rate when no input to system.
Parameters: n - Frame rate; [0|1|2|3], 50Hz|59.94Hz|75Hz|60Hz
Query:
OFRATEBP?
Returns the Output Frame Rate in the format:
=n