Operator`s manual

54 BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
RS-232 Config Menu
Echo
The user can turn ECHO ON or OFF. When ECHO is ON, commands received by the unit will be transmitted back to
the source device.
Baud Rate
The following baud rate settings are supported 1200, 2400, 9600, 19.2K, and 38.4K.
Data Bits
The number of data bits per character can be set to 7 or 8.
Stop Bits
The number of stop bits can be set to 1 or 2.
Parity
Parity can be set to Even, Odd or None.
Handshaking
Handshaking can be set to On or Off.
Reset RS-232
All RS-232 parameters can be reset to factory defaults by selecting this menu item and pressing the SEL key.
RS-232 CONFIG
ECHO ON
BAUD RATE 38.4K
DATA BIT 8
STOP BIT 1
PARITY NONE
HANDSHAKING ON
RESET RS-232