Operator`s manual

48 BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
Feathering
Feathering can be disabled by selecting the OFF mode or enabled by selecting the ON mode.
Feathering Setup Menu with ADVANCED Blend Level Selected
The configuration selections in this menu apply only to the specified projector. If a gamma adjustment was made
using the Basic menu selections and subsequently Advanced blend level control was selected, that gamma value will
be saved and displayed in this menu for all outputs. The user may then perform individual adjustments as required. If
the Basic level menu is selected after changes are made using the Advanced menu, the gamma value for projector 1
will be used for the Basic gamma setting.
Output Select
The output to be adjusted is selected with this menu item. Selection options are 1 to 4 for a BlendPro controlling the
first four screens. For a BlendPro controlling screens 5 and above, the value can be 5 to 8.
Left Gamma
The gamma of the edge blending curve on the left hand side of the selected output screen is controlled by this
gamma parameter. Gamma factor may be from 1.0 to 5.0.
Right Gamma
The gamma of the edge blending curve on the right hand side of the selected output screen is controlled by this
gamma parameter. Gamma factor may be from 1.0 to 5.0.
Left Feathering
Feathering on the left hand side of the selected output screen can be disabled by selecting the OFF mode or enabled
by selecting the ON mode.
Right Feathering
Feathering on the right hand side of the selected output screen can be disabled by selecting the OFF mode or
enabled by selecting the ON mode.
ADV FEATHERING SETUP
OUTPUT SELECT 1
LEFT GAMMA 1.0
RIGHT GAMMA 1.0
LEFT FEATHERING OFF
RT FEATHERING OFF