Operator`s manual

Manual # 26-0206000-00 / Revision A BlendPRO – Wide Screen Image Processor 45
The adjustment range for Brightness and Contrast is -25.0% to +25.0% with 0.0% as the default value.
The Reset Color menu item resets all the fields in this sub menu to the default value (0.0%). To reset the color
balance controls, scroll to the Reset Color menu item and select the menu item with the SEL key.
The values in this submenu will be updated after an auto-color balance has been performed. In order to save these
values in non-volatile memory the user must save the configuration.
Reset Configuration
The Reset Configuration menu item forces the BlendPRO
TM
to ignore Input Setup configuration information previously
entered by the user, to perform an analysis of the input video and to derive and enter new input video default values.
To activate this function scroll to the Reset Configurations menu item and press the SEL key.
Save Configuration
The Save Configuration menu item saves the input setup parameters as a configuration file for the selected input
channel. The configuration file is automatically loaded each time the unit is turned on, and the file saved matches the
input video.
NOTE:
Whenever a modification is made to a configuration, you must save the changes following the procedure
above
Save All Configuration
The Save All Configuration menu item saves the input setup parameters as configuration files for all four of the input
channels. The configuration files are automatically loaded each time the unit is turned on, and the file saved matches
the input video.
NOTE:
Whenever a modification is made to a configuration, you must save the changes following the procedure
above.
RGB COLOR BALANCE 1
R CONTRAST 0.0%
R BRIGHTNESS 0.0%
G CONTRAST 0.0%
G BRIGHTNESS 0.0%
B CONTRAST 0.0%
B BRIGHTNESS 0.0%
RESET COLOR