Operator`s manual

28 BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
Section) to configure the BlendPRO unit. The user follows a series of instructions to perform configuration activities.
As the instructions are carried out, BlendWizard sends commands to the BlendPRO (and ScreenPRO PLUS, if
applicable) to download configuration files and select test patterns to support projector setup, alignment, etc. The
operator can adjust system parameters to optimize performance by returning to any portion of the configuration
sequence for fine-tuning of parameters such as black level control in non-overlapped areas or edge-feathering
transfer functions.