Operator`s manual

18 BlendPRO – Wide Screen Image Processor Manual # 26-0206000-00 / Revision A
Expansion In/Expansion Out connections
Two connectors on the BlendPRO use DVI-D connectors. These connectors are only used when more than one
BlendPRO is used, i.e. in applications requiring more than four projectors. The Expansion Out connector is used to
send video signals in digital format from the BlendPRO controlling projectors 1-4 to the BlendPRO controlling
projectors 5-8. The video information is a digital representation of the input connected to video source #4. The
second BlendPRO unit controlling projectors 5-8 uses this information received on its Expansion In port as its master
video source.
DVI-D
Expansion In and Out DVI-I Female
PIN# SIGNAL PIN# SIGNAL
1 T.M.D.S DATA 2- 16
2 T.M.D.S DATA 2+ 17 T.M.D.S DATA 0-
3 GND 18 T.M.D.S DATA 0+
4 19 GND
5 20
6 21
7 22 GND
8 23 T.M.D.S CLOCK+
9 T.M.D.S DATA 1- 24 T.M.D.S CLOCK-
10 T.M.D.S DATA 1+
11 GND C1
12 C2
13 C3
14 C4
15 GND C5 GND