Operator`s manual

Manual # 26-0206000-00 / Revision A BlendPRO – Wide Screen Image Processor 15
Video Input Connections
HD-15 Input Connector Pinout
The video input section on the BlendPRO
TM
rear panel provides four analog RGB inputs. The connections for the
input channels can be made via five BNC connectors or HD-15 connectors. Connection pins for each video signal are
specified below.
NOTE: A valid input signal, at a video format supported by BlendPRO(1280x1024, 1024x768, 800x600), must always
be connected to BlendPRO Input Video Channel #1 for proper operation.
RGBHV
Pin 1
RED
Pin 2
GREEN
Pin 3
BLUE
Pin 4
Pin 5
Pin 6
RED return
Pin 7
GREEN return
Pin 8
BLUE return
Pin 9
Pin 10
GND
Pin 11
Pin 12
Pin 13
Hsync or Csync
Pin 14
Vsync
Pin 15
15
1115
6
HD-15 Input Connector Pinout
(as viewed from rear of unit)
BNC Input Connectors
*NOTE: Composite sync or separate Hsync and Vsync signals are accepted. Sync on Green is also supported.
Format – RGBHV
(Typical Devices: Folsom Research seamless switchers/scalers)
Source to BlendPRO
TM
R Red
G Green
B Blue
H/C Hsync or Csync*
V Vsync