Instruction manual

ScreenPRO-II Controller • User’s Guide 93
4. Menu Orientation
Input Menu
fåéìí=`çåÑáÖìê~íáçå=jÉåì
From the Input Menu, press {CFG} to display the Input Configuration Menu.
Figure 4-4. Input Configuration Menu (sample)
Each input has an associated file that stores all input parameters and settings. Each time
an input is selected on the
Source Selection Bus, its associated file is recalled the instant
before it appears on Preview.
The
Input Configuration Menu enables you to save or delete the input’s associated file —
which guarantees that the exact parameters you set are those that are used on air.
The following functions are provided:
• File Number — sets the file number into which data is stored. In the current
version, the file number defaults to the input number and cannot be changed.
• File Name — sets the alphanumeric file name. In the current version, the file
name automatically defaults to the input name and cannot be changed.
• Delete Applies To — because inputs may be set up differently depending upon
the destination, this parameter enables you to identify the destination from which
you want to delete the associated file.
• Press {SAVE} to save the selected input in the designated input file.
• Press {DELETE} to delete the selected input file from the designated destination.
File Name IFILE_001
B
A
C
K
N
A
V
A
D
J
INPUT CONFIGURATION SRC_1
SAVE DELETE
File Number 1
Delete Applies To: Dest 1
Note
If multiple destinations are selected (for example, when you
are using two single-screen configurations), pressing
{SAVE}
copies input parameters to both destinations, eliminating the
need to configure and save each input twice.