Instruction manual

162 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Clone Setup Menu
`äçåÉ=pÉíìé=jÉåì
Press CLONE to display the Clone Setup Menu.
Figure 4-59. Clone Setup Menu (sample)
The Clone Menu enables you to set up parameters for a cloned layer. Please note:
• The mode can only be enabled when a widescreen destination is selected.
• The mode cannot be enabled if the PIP or Key straddles any part of the center of
the overall widescreen.
• Both PIPs and Keys can be cloned.
• You can perform a Move in conjunction with a cloned layer.
The following functions are provided:
• Destination — displays the currently selected destination.
• Clone Type — sets the type of clone “motion.”
~ Offset — both images move together with a fixed pixel offset between
the two. For example, if you adjust
H Position, both images move left
and right. If you adjust
V Position, both images move up and down.
Figure 4-60. Clone Offset Mode
Offset
Clone Type
Offset
704
N
A
V
A
D
J
CLONE SETUP
P
I
P
Destination [ 1 ]
B
O
R
D
R
S
H
D
O
W
E
F
X
PIP A
Cloned
PIP A