Instruction manual

154 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
PIP Adjustment Menu
• Mode — In the “Strobe” section, enables or disables the strobe mode which when
enabled, acts as a programmable freeze.
• Interval (frames) — In the “Strobe” section, sets the freeze interval.
• Press {RESET RGB} to reset all image colors to their default values.
• Press {PIP} to return to the PIP Adjustment Menu. Refer to the “PIP
Adjustment Menu Functions” section on page 149 for details.
• Press {BORDR} to display the Border Menu. Refer to the “Border Menu”
section on page 151 for details.
• Press {SHDOW} to display the Shadow Menu. Refer to the “Shadow Menu”
section on page 152 for details.
Note
To remove any image effects from the PIP or Key, press the
RESET button in the Layer Functions Section — while the
Image Effects Menu is active. No other PIP parameters will
be affected.