Instruction manual

152 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
PIP Adjustment Menu
pÜ~Ççï=jÉåì
From the PIP Adjustment Menu, press {SHDOW} to display the Shadow Menu.
Figure 4-53. Shadow Menu (sample)
The Shadow Menu enables you place a shadow behind a PIP, and adjust its size, position
and transparency.
The following functions are provided:
• Mode — enables or disables the PIP’s shadow.
• H Size < % > — adjusts the shadow’s horizontal size as a percentage of the PIP’s
size. If
{TRACK SIZE} is checked, H and V size adjust proportionally.
• V Size < % > — adjusts the shadow’s vertical size as a percentage of the PIP’s
size. If
{TRACK SIZE} is checked, H and V size adjust proportionally.
• H Pos < % > — adjusts the shadow’s horizontal position as an offset from the
base PIP image. The value represents a percentage of the PIP’s size.
• V Pos < % > — adjusts the shadow’s vertical position as an offset from the base
PIP image. The value represents a percentage of the PIP’s size.
• Transparency — adjusts the shadow’s transparency, from 0 (full transparency) to
1024 (opaque).
• Check {TRACK SIZE} to adjust the shadow’s H Size and V Size proportionally.
• Press {PIP} to return to the PIP Adjustment Menu. Refer to the “PIP
Adjustment Menu Functions” section on page 149 for details.
• Press {BORDR} to display the Border Menu. Refer to the “Border Menu”
section on page 151 for details.
• Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects
Menu” section on page 153 for details.
V Size < % >
H Size < % >
Transparency
106
106
100
H
O
M
E
N
A
V
A
D
J
SHADOW
P
I
P
28
Mode On
11
H Pos < % >
V Pos < % >
TRACK SIZE
3
B
O
R
D
R
E
F
X
Note
You can also access the Shadow Menu from the Border
Menu
and the Image Effects Menu by pressing {SHDOW}.