Instruction manual

ScreenPRO-II Controller • User’s Guide 149
4. Menu Orientation
PIP Adjustment Menu
mfm=^ÇàìëíãÉåí=jÉåì=aÉëÅêáéíáçå
The figure below illustrates a sample PIP Adjustment Menu:
Figure 4-51. PIP Adjustment Menu (sample)
The PIP Adjustment Menu provides tools that enable you to adjust the “active” PIP. To
access the menu:
• Press LAYER A or LAYER B in the Layer Control Section, then ...
• Press the PIP button in the Layer Function Section.
mfm=^ÇàìëíãÉåí=jÉåì=cìåÅíáçåë
The following PIP Adjustment Menu functions are provided:
• H Size — adjusts the PIP’s horizontal size in pixels. The “%” value is the PIP’s
size as a percentage of the screen’s horizontal resolution. The numeric value is
the PIP’s width in pixels. To adjust, use the
ADJ knob or the Joystick’s Z-Axis
knob.
• V Size — adjusts the PIP’s vertical size in pixels. The “%” value is the PIP’s size
as a percentage of the screen’s vertical resolution. The numeric value is the PIP’s
height in pixels. To adjust, use the
ADJ knob or the Joystick’s Z-Axis knob.
• H Position — indicates the PIP’s position, relative to the horizontal center of the
screen (
00), as measured from the exact center of the PIP. Thus, the value -34 is
34 pixels to the left of center. To adjust, move the Joystick left and right or use the
ADJ knob.
• V Position — indicates the PIP’s position, relative to the vertical center of the
screen (
00), as measured from the exact center of the PIP. Thus, the value 70 is
70 pixels above center. To adjust
V Position, move the Joystick up and down or
use the
ADJ knob.
• Move Rate — adjusts the rate (in 0.1 second increments) for programmed PIP
movement from key frame to key frame. To adjust, use the
ADJ knob or twist the
Joystick Z-Axis knob.
H Position
V Position
V Size < 58.9% >
452
-34
H
O
M
E
N
A
V
PIP ADJUSTMENT
B
O
R
D
R
70
A
D
J
S
H
D
O
W
E
F
X
Move Rate 0.8
Key Frame Effect [ LINEAR ]
H Size < 37.3% > 674
TRACK SIZE
3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
OPERATION:
JOY Z to SIZE, X Y TO POSITION