Instruction manual

ScreenPRO-II Controller • User’s Guide 145
4. Menu Orientation
Frame Grab Menu
cê~ãÉ=dê~Ä=k~ãÉ=jÉåì
The figure below illustrates a sample Frame Grab Name Menu:
Figure 4-47. Frame Grab Name Menu (sample)
The Frame Grab Name Menu enables you to name a saved frame grab, using a customer
supplied PS-2 keyboard.
The following functions are provided:
• Saved Location — enables you to select the saved frame that you want to name.
You must use the
Save function (on the Frame Grab Menu) as a prerequisite to
naming the frame.
• Current Name — displays the name of the saved frame.
• New Name — enables you to enter a new name with the PS-2 keyboard. Once
entered, the name is “attached” to the file that already resides in permanent (flash)
memory. The name will now be shown on all menus in which a still frame can be
selected (e.g.,
LOGO Menu, DSK Input Setup Menu, Background Input Setup
Menu
, etc.).
Current Name:
B
A
C
K
N
A
V
A
D
J
FRAME GRAB NAME
Saved Location 1
Enter a new name for this saved
frame grab using a PS2 keyboard,
[ SAVED_FG_1 ]
New Name:
[ SAVED_FG_1 ]
then hit Enter to save it.
Note
The optional Tally board is required for the “naming” feature.
The board includes the tally connector plus a PS-2 connector
for the
Keyboard Port.