Instruction manual

ScreenPRO-II Controller • User’s Guide 111
4. Menu Orientation
System Menu
póëíÉã=oÉëÉí=jÉåì
From the System Menu, press {RESET} to display the System Reset Menu:
Figure 4-18. System Reset Menu (sample)
The System Reset Menu enables you to perform various system reset functions. The
following functions are provided:
• Device — selects which device(s) to reset. Choose between ALL,
CONTROLLER, SP, or BP.
• Reset Option — for the selected device(s), chooses the specific subset that you
wish to reset. Choose between
All Detected SPs or Active Dests.
• Reset Type — selects the type of reset that you wish to perform. Choose between
SOFT or FACTORY. Note that selecting SOFT will not delete any user defined
configurations, while
FACTORY deletes all user configurations.
• Press {RESET} to perform the selected reset operation. When the confirmation
screen appears:
~ Press {YES} to start the reset procedure. An “In Progress” message will
be displayed.
~ Press {NO} to cancel the procedure.
B
A
C
K
N
A
V
A
D
J
SYSTEM RESET
RESET
ALLDevice
All Detected SPsReset Option
SOFTReset Type
Note
BP = BlendPRO-II
SP = ScreenPRO-II