Instruction manual

106 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Output Menu
• Alignment Test Pattern — for convenience, this function enables you to turn the
alignment test pattern on or off from
this menu (in addition to the Wide Screen
Settings Menu
).
táÇÉ=pÅêÉÉå=pÉííáåÖë=jÉåì
From the Output Menu, press {WIDE SCREEN} to display the Wide Screen Settings
Menu
.
Figure 4-15. Wide Screen Settings Menu (sample)
The Wide Screen Settings Menu provides the tools required for wide screen setup and
adjustment. Note that this menu can only be accessed when the destination selected in the
Output Menu is designated as wide screen. Refer to the “Destination Setup Menu”
section on page 117 for details.
The following functions are provided on the
Wide Screen Settings Menu.
• Total Projectors — indicates the total number of ScreenPRO-II systems that
have been assigned to the wide screen destination. This field is for information
only, as derived from the
Destination Setup Menu.
Note
This field only appears when a wide screen destination is
selected.
Total H Res
B
A
C
K
N
A
V
A
D
J
WIDE SCREEN SETTINGS
Total Projectors [ 2 ]
2048
Total V Res [ 768 ]
Background Format Edge-Butted
Marker Mode Off
Overlap Width 0
Alignment Test Pattern Off
Data Doubling Off
Justification Center
Important
As an important prerequisite to widescreen setup (and to
make widescreen setup easy), Barco offers the
Configurator
application to assist with wide screen setup. The software is
available via download from the website, or you can contact
Barco
Technical Support for details. In Appendix B, refer to
the “
Contact Information” section on page 268 for
information.