Instruction manual

102 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Output Menu
lìíéìí=jÉåì=cìåÅíáçåë
The following Output Menu functions are provided:
• Destination — indicates the destination on which you are currently working (as
selected on the
Destination Bus).
• Format — sets the resolution and frame rate at which you want to drive the
destination’s projector(s). To minimize synchronization problems, select a frame
rate that is consistent with your input sources.
S Example: If you are using 59.94 NTSC video inputs, run the output at the
same rate in order to reduce jutter artifacts.
After selecting a format, press
{APPLY FORMAT} to accept the selection. In
Appendix A, refer to the “
ScreenPRO-II Input and Output Resolutions” section
on page 263 for details on all available resolutions.
• Color Space — displays the output color space per the specifics of the selected
output resolution and frame rate.
• Press {GLCK} to display the Genlock Menu. Refer to the “Genlock Menu”
section on page 103 for details.
• Press {APPLY FORMAT} to accept a selected output format. In Appendix A, refer
to the “
ScreenPRO-II Input and Output Resolutions” section on page 263 for
details on all available resolutions.
• Press {SETTINGS} to display the Settings Menu. Refer to the “Settings Menu”
section on page 104 for details.
• Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “Test
Pattern Menu” section on page 105 for details.
• Press {WIDE SCREEN} to display the Wide Screen Menu. Refer to the “Wide
Screen Settings Menu” section on page 106 for details.
lìíéìí=pìÄ=jÉåìë
The following sub menus can be accessed from the Output Menu:
• Genlock Menu
• Settings Menu
• Test Pattern Menu
• Wide Screen Settings Menu
Note
The selected destination can be configured as a single
screen or multiple screens (in a wide screen application). In
this situation, all changes to the
Output Menu affect all
ScreenPRO-II units in the wide screen definition.
Note
This softkey only appears when a wide screen destination is
selected.