User's Manual

2. Xenon bulb lamp replacement process
3. Release t he xenon bulb lam p from its socket by removing the hexagon socket head cap screw and plane washer as illustrated.
Use a 4 mm Allen wr ench.
Image 2-4
4. Slide the white anode socket, which is connected via a thick wire with the xenon bulb lamp, upwards away from its position and
then remove the x enon bulb lamp with anode socket from the lamp h ouse.
Image 2-5
5. Place the xenon bulb lamp into a protective container or wrap a protective cloth arou nd the xenon bulb lamp.
6. Remove the anode wire lug from the a
node socke t. Use for that two open ended spanners of 17 mm. Hold fast the nut N1 with
one spanner while releasing the nut N2 with the other spanner. Note that a plane washer (W1 & W2) is pr ovided on both sides
of the anode wire lug (L).
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008 11