User's Manual

2. Xenon bulb lamp replacement process
2.1 Removal of the lamp house
WARNING: This procedure may only be performed by qualified technical service personnel.
CAUTION: Lam p casing is very hot after operation. To avoid burns, let the projector cool do w n for at least 15
minutes before proceeding to the lamp unit replacement.
CAUTION: Due to its high internal p ressure, the lamp may exp lode in either hot o r cold states if imp roperly
handled.
Necessary tools
7mmflat screw driver.
How to remove t he lamp house of the projector ?
1. Switch off the projector.
2. Remove the lamp cover.
3. Release the three spring lock screws of the lam p hous e as illustrated.
Image 2-1
4. Hold fast the lamp house by the handles and pull the lamp house o ut of the projector.
Caution: Beware of the weight of the lamp assembly. Take the nec essary precautions to avoid personal injury.
Image 2-2
5. Place the lamp house on a stable support.
8
R59770175 XENON BULB LAMP REPLACEMENT 24/09/2008