user manual

Rear Connections:
Power Input: IEC - C14 100 - 240V 50/60Hz 750W
Data connections:
● 6x USB 1.1/2.0
● 1 x PS2
● 4 x PXL outputs on dual 10/100/1000Mbps ethernet ports
● 1 x User Port on a dual 10/100/1000Mbps ethernet port
● 1 x Factory Port on a dual 10/100/1000Mbps ethernet port
● 1 x DVI monitoring output
● 1 x DVI over HDMI connector input (SMPTE 125M, SMPTE 170M, ITU - R BT.656 - 4, SMPTE 296M - 2001, SMPTE 274M - 2005)
● 1 x HD - SDI input (SMPTE 125M, SMPTE 170M, ITU - R BT.656 - 4, SMPTE 296M - 2001, SMPTE 274M - 2005)
● 1 x Genlock input
NOTE:
The Vizomo R1i unit has two video inputs. One for HDMI and another for SDI capture. Only one active input should be connected at any
given time.
L1i (530 - 0317)
Rear Connections:
Power Input: IEC - C14 100 - 240V 50/60Hz 350W
Data connections:
● 6x USB 1.1/2.0
● 1 x PS2
● 1 x PXL output dual 10/100/1000Mbps ethernet port
● 1 x User dual 10/100/1000Mbps ethernet port
● 1 x DVI monitoring output
● 1 x DVI over HDMI connector input (SMPTE 125M, SMPTE 170M, ITU - R BT.656 - 4, SMPTE 296M - 2001, SMPTE 274M - 2005)
4. Vizomo . 73
PXL System