user manual

Home

2. C

series Tile

2.5 Power & Data Distribution

2.5.1 Tile Status Indicator

The colored status indicator located on the back of the C-series tile allows you to easily monitor the state of each tile.

Off

No Power (Note: the status indicator remains black for a few seconds when the tile is first powered on)

Off

Optional. Operating normally in stealth mode, when the green "normal operation" indicator may interfere with the look of the back of the wall.

In this mode, other states will still light up with the colors listed below. To enable stealth mode, the setting

system.output.pxl.disable_status_indicator must be set to true on the Vizomo processor.

White

Tile is powering up

Magenta

Tile has booted, but not yet receiving data

Orange

Top or bottom data link is working properly

Blue

Both data links are working properly

Green

Video data is being received (normal operation)

Flashing

Red

Error

2. C

series Tile . 27

PXL System