user manual

Home

5. Power and Data Distribution

5.1 Hookup with a PXL Switch

The image below illustrates the data flow of a C-series system from image capture to tile using a PXL switch for data and power routing.

Connections Checklist

●

DVI over HDMI or SDI (to a R1i only) signal connected to Vizomo capture card

● Network cable from a Vizomo PXL output to a switch PXL input

●

Break

in cable from switch PXL output to tiles. Observe maximum tiles per line limit

● 100-240V 50/60Hz VAC power source to Vizomo and PXL Switch(es)

● 200-240V 50/60Hz VAC power source to PXL tiles

Observe the following data limits when setting up your C-series display.

WARNING

• Never attach more than one PXL switch to a Vizomo output.

• Never attach more than one Vizomo PXL output to a switch.

Fixture

Max panels per PDB

-5 output

C11

C8v

5. Power and Data Distribution . 101

PXL System