Instruction manual

ACS-2048 • User’s Guide 99
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Remote Commands
• Query Format: GATEWAY -?
• Query Response: GATEWAY -a (active addr) -s (static addr)
• Query Params: -a (active addr): Active gateway active address
bj^`
• Description: Get MAC Address
• Command Format: N/A
• Command Params: N/A
• Query Format: EMAC -?
• Query Response: EMAC -a (addr)
• Response Params: -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx
^rql^`n
• Description: Auto Input Acquisition Mode.
• Command Format: AUTOACQ -m (mode)
• Command Params: -m mode: 0-off, 1-on (Default: on)
• Query Format: AUTOACQ -?
• Query Response: AUTOACQ -m (mode) --min 0 --max 1
fpbi
• Description: Selects the selected input as the current input to display. This
command will perform the valid sync check, route the input, recall video if saved
or acquire source if not saved.
• Command Format: ISEL -i (input)
• Parameters: -i (input): 1 - 8
• Query Format: ISEL -?
• Query Response: ISEL -i (input)
fe`olm=
• Description: Input Horizontal Crop
• Command Format: IHCROP -i (input) -w (width)
• Parameters:
-i (input): 1 - 8
-w (width): In pixels
• Query Format: IHCROP -i (input) -?
• Query Response: IHCROP -i (input) -w(width) --min (pos min) -- max (pos max)
fem^k=
• Description: Input Horizontal Pan
• Command Format: IHPAN -i (input) -p (pan)