Instruction manual

ACS-2048 • User’s Guide 97
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
ACS-2048 Command List
^`pJOMQU=`çãã~åÇ=iáëí
The table below lists ACS-2048 remote commands.
Table B-1. ACS-2048 Remote Commands
Command Description Page
DHCP Enable/Disable DHCP mode 98
IP
Set Static IP Address to be used when DHCP is OFF 98
SUBNET
Set subnet mask to be used when DHCP is OFF 98
GATEWAY
Set gateway to be used when DHCP is OFF 98
EMAC
Get MAC Address 99
AUTOACQ
Auto Input Acquisition Mode 99
ISEL
Selects the selected input as the current input to display 99
IHCROP
Input Horizontal Crop 99
IHPAN
Input Horizontal Pan 99
IVCROP
Input Vertical Crop 100
IVPAN
Input Vertical Pan 100
ICSAV
Saves Input Configuration 100
ICREC
Recalls saved input configuration for selected input 100
BLKVID
Puts black into the scaler selected 101
ORES
Output Resolution 101
OTPM
Output Test Pattern Mode 101
OTPT
Output Test Pattern Type 101
ORBM
Output Raster Box Mode 102
OMODE
Set the output mode 102
OGM
Set Output Gamma 103
OCSAV
Save Output Configuration 103
TRNTIME
Set transition time 103
VFDBRT
Set VFD brightness 103
AUTOSAVE
Auto Input Settings Save 104
SELMODE
Sets whether input selection of inputs w/o valid syncs will be made 104
CONTEXT
Sets menu context 104
TEMP
Query only command for the temperature of the unit 104
RESET
Reset unit 104
VER
Display Version info 104