Instruction manual

ACS-2048 • User’s Guide 67
4. Operation
Using the Main Menu
pçÑíï~êÉ=sÉêëáçå
From the Main Menu, select Software Version to display the Software Version Menu:
Figure 4-41. Software Version Menu
The version shown is the current version of installed operating firmware. This number
changes when you update system software. In Chapter 5, refer to the “Software Upgrade
Overview” section on page 74 for software update instructions.
c~Åíçêó=oÉëÉí
From the Main Menu, select Factory Reset to display the Factory Reset Menu:
Figure 4-42. Factory Reset Menu
This function enables you to reset the ACS-2048 to its factory default condition, in which all
input, output and system configuration files are deleted. When the command is executed,
a confirmation menu is shown.
• Press SEL to reset the system.
• Press ESC to cancel the operation, and return to the Main Menu.
The following attributes constitute a “factory default” condition:
• The TEST PAT button is selected.
• All “Sync Present” states are shown correctly (backlit buttons).
• The Output is set to 2048x1080@59.94.
• The Output Raster Box is OFF.
• The Main Menu is displayed.
• All menu items are set to their default values (as specified throughout this
chapter).
SOFTWARE VERSION
01.00
Clear All Saved
Configurations?
<SEL> = Yes
<ESC> = No