Instruction manual

66 ACS-2048 • User’s Guide
4. Operation
Using the Main Menu
pí~íìë=jÉåì
From the Main Menu, select Status to display the Status Menu:
Figure 4-40. Status Menu (sample)
The Status Menu provides information about the currently selected system input and
output. The input section always reflects the selected input channel, as determined by the
input buttons. Please note:
• If Menu Context is ON (on the User Preference Menu), selecting a different
automatically displays the Input Menu. The Status Menu will be updated with
new data the next time you access it.
• If Menu Context is OFF, the Status Menu remains on display when you select a
different input, and it automatically updates with the input’s new status. Press
ESC to return to the Main Menu.
In the Status Menu, the variable fields are as follows:
• Input Type — Specifies the type of input signal being processed.
• Input Format — Indicates the current input video format in the form:
Hact x Vact @ Vr Hz
S 1280x1024@60 Hz
If the currently selected input does not have a valid input signal, the Input Format
field displays “Invalid Signal.”
• Output Type — indicates the selected output type, as well as HCDP status. The
following labels can appear, depending on the output and HDCP implementation:
~ 8-bit ~ Twin 12-bit
~ 8-bit HDCP ~ Twin 12-bit HDCP
~ Twin 10-bit ~ HDCP Violation
~ Twin 10-bit HDCP
• Output Format — Indicates the current output video format in the form:
Hact x Vact @ Vr Hz
S 2048x1080@59.94 Hz
IN: SDI
— Input Type
1920x1080i @60
— Input Format
OUT: Twin 10-bit
— Output Type
2048x1080p @59.94
— Output Format
Important
If the label “HDCP Violation” appears, it indicates that an
HDCP source is selected, but a non-HDCP compliant monitor
or device (such as an HDCP repeater) has been detected. In
this situation, video output is disabled.