Instruction manual

ACS-2048 • User’s Guide 61
4. Operation
Using the Main Menu
The following functions are available:
• Input — selects the exact inputs that you wish to program: ALL (inputs 2 and 3),
2 (individually), or 3 (individually).
• EDID Format — This line displays the system’s current EDID format, and enables
you to select a new EDID format to program into non-volatile memory. As
required, press SEL to scroll through the formats.
• Program EDID — Select this function to program the preferred DVI resolution, as
defined on the EDID Format line. When SEL is pressed, the following message
is briefly displayed.
Figure 4-30. Programming EDID Message 1
If the non-volatile memory programming is successful, the following message is
displayed:
Figure 4-31. Programming EDID Message 2
If the EDID programming failed, the following message will be displayed:
Figure 4-32. EDID Programming Failed Message
If this message persists, please contact customer service for technical support.
Programming EDID
Please wait ...
EDID Prog Done
Connect DVI inputs
and reboot the PC
ESC = Continue
Note
At this point, reboot the external computer(s) in order for the
new EDID information to be read, and the new preferred
resolution to become available.
EDID Prog failed!
ESC = Continue