Instruction manual

ACS-2048 • User’s Guide 59
4. Operation
Using the Main Menu
• Config Network — select this function to display the Config Network Menu,
which enables you to choose the specific Ethernet address you wish to change.
Figure 4-25. Config Network Menu
~ Select Set Static IP to display the Static IP Menu, which enables you to
set a static IP address when a DHCP server is not available. The editing
procedure is discussed below.
Figure 4-26. Static IP Menu
~ Select Set Netmask to display the Netmask Menu, which enables you
to set a netmask. The editing procedure is discussed below.
Figure 4-27. Netmask Menu
~ Select Set Gateway to display the Gateway Menu, which enables you to
set a gateway. The editing procedure is discussed below.
Figure 4-28. Gateway Menu (sample)
Use the following steps to edit the IP address, Netmask or Gateway. Valid fields
range from 000 to 255.
a. Press SEL to begin editing. This action highlights the first digit, and
displays the carat “^.”
b. Use the ADJUST knob to move the carat left and right through the
address.
CONFIG NETWORK
> Set Static IP >>
Set Netmask >>
Set Gateway >>
STATIC IP
> 192.168.000.001
Netmask
> 255.255.255.000
Gateway
> 192.168.000.002