Instruction manual

ACS-2048 • User’s Guide 57
4. Operation
Using the Main Menu
póëíÉã=jÉåì
From the Main Menu, select System to display the System Menu, which enables you to
to adjust transition times, VFD Brightness, and other “system” related functions:
Figure 4-22. System Menu (sample)
Following are descriptions of each System Menu function:
• Trans Time
• VFD Brightness
• Ethernet
• EDID DVI Input Format
• DVI Cable Equalization
• Temperature
• User Preference
• Diagnostics
• Save System Config
qê~åë=qáãÉ
From the System Menu, select Trans Time to change the current transition rate that is
used when you switch between inputs. Please note the following points:
• The transition type is fixed as "Transition to Black." When you change inputs,
the current input fades to black, then the new input's video transitions up at the
selected Trans Time.
• The transition time is defined as the total time required for the system to fade to
black, switch to the new input, and fade up to the new input.
Figure 4-23. Transition Time Diagram
SYSTEM
> Trans Time 1.5
VFD Brightness 10
Ethernet >>
EDID DVI In Frmt >>
DVI Cable Equal >>
Temperature >>
User Preference >>
Diagnostics >>
Save Config
Input 1 Input 2
Black
Transition Time
100% Video
Switch