Instruction manual

56 ACS-2048 • User’s Guide
4. Operation
Using the Main Menu
p~îÉ=lìíéìí=`çåÑáÖ
From the Output Menu, select Save Config to save the current output configuration. A
message is briefly shown, after which the system returns to the Output Menu.
Figure 4-20. Saving Output Configuration Message
Please note the following important points regarding the output configuration file:
• When you perform the Save Config function, all configuration parameters from
the Output Menu are saved in non-volatile memory. If you do not perform the
function, output data will not be restored upon the next system power up.
• If you make a change in the Output Menu, and attempt to exit the menu (by
pressing ESC or TEST PAT) without saving changes, the system displays the
following prompt:
Figure 4-21. Save Output Configuration Prompt
~ Select Yes (SEL) to save changes.
~ Select No (ESC) to continue operation without saving the changes.
Saving Output Config
Save Output Cfg?
<SEL> = Yes
<ESC> = No