Instruction manual

ACS-2048 • User’s Guide 53
4. Operation
Using the Main Menu
lìíéìí=jÉåì
From the Main Menu, select Output to display the Output Menu, which enables you to
configure the outputs of the ACS-2048.
Figure 4-17. Output Menu (sample)
Following are descriptions of each Output Menu function:
• Output Format
• Output Mode
• Gamma
• Test Pattern
• Output Adjust
• Save Output Config
lìíéìí=cçêã~í
From the Output Menu, select the top Output Format line to view or change the current
output format. This line indicates the format in the following form:
Hact x Vact @ Vr Hz
Two output formats can be set for the ACS-2048:
• 2048x1080p @ 59.94Hz
• 2048x1080p @ 50Hz
lìíéìí=jçÇÉ
From the Output Menu, select Output Mode to change the selected output mode between
8-bit, 10-bit or 12-bit output.
• Adjustment range: 8-bit, 10-bit or 12-bit output
• Default: 10-bit (this mode requires connecting both outputs to the projector)
Please note the following points regarding the ACS-2048’s two DVI-I output connectors:
• In 10-bit or 12-bit mode, both outputs (A and B) must be connected to the
projector. In 8-bit mode, a connection is required from Connector A only.
• Connector A: Only 8-bit output mode can be selected on this connector,
providing standard 8-bit DVI output.
OUTPUT
> 2048x1080p @50
Output Mode 10 bits
Gamma 0.0
Test Pattern >>
Output Adjust >>
Save Config
Note
The output format is not updated until SEL is pressed.