Instruction manual

ACS-2048 • User’s Guide 51
4. Operation
Using the Main Menu
p~îÉ=fåéìí=`çåÑáÖ
From the Input Menu, select Save Config to save the input configuration for the currently
selected input. A confirmation message is briefly displayed, after which the system returns
to the Input Menu.
Figure 4-14. Saving Input Configuration Message
Please note the following important points regarding input configuration files:
• The ACS-2048 supports one Input Configuration File for each physical input. It
is not necessary to enter file names or numbers.
• When you perform the Save Config function, input configuration parameters are
saved in non-volatile memory for each input source. If you do not perform the
Save Config function, data for the selected input will not be restored upon the
next system power up sequence.
• If you make a change within the Input Menu, and attempt to exit the menu (by
pressing ESC, TEST PAT, or by selecting another input) without saving changes,
the system displays the following prompt:
Figure 4-15. Save Input Configuration Prompt
~ Select Yes (SEL) to save changes.
~ Select No (ESC) to continue operation without saving the changes.
oÉëÉí=`çåÑáÖ
From the Input Menu, select Reset Config to remove all user-entered configuration
settings from the current input, and restore the input’s format parameters from the system’s
internal library values. When you select the function, you will be prompted to reset (SEL)
or continue without resetting (ESC).
Note that if the current format was derived as a best guess, those “guess” values are
restored.
Saving Input Config
Save Input Cfg?
<SEL> = Yes
<ESC> = No