Instruction manual

48 ACS-2048 • User’s Guide
4. Operation
Using the Main Menu
• Default (all values): 0.0%
• Select Reset All to set all values back to their default settings.
eìÉLp~íìê~íáçå=`çäçê=_~ä~åÅÉ=jÉåì
If the current input’s type is set to Composite, S-video, YPbPr, or SDI, the Hue/
Saturation Color Balance Menu appears:
Figure 4-11. Hue/Saturation Color Balance Menu (sample)
Please note:
• Hue is measured in degrees, and is [N/A] for YP
b
P
r
inputs.
~ Adjustment range: -90 to +90
• Saturation is measured in percentage.
~ Adjustment range (Composite, S-Video): 0% to 150% (100% nominal)
~ Adjustment range (SDI, YP
b
P
r
): 75.0% to 125.0%
• Select Reset All to set all values back to their default settings.
qáãáåÖ=^Çàìëí
From the Input Menu, select Timing Adjust to display the Timing Adjust Menu. The
menu changes slightly, depending on the selected sampling mode (1:1 or Oversample).
This menu allows for exact positioning of the input signal's active area.
The figure below illustrates the Timing Adjust Menu:
Figure 4-12. Timing Adjust Menu (sample)
The following functions are available:
• Auto Config — This function is identical to the Auto Config function located in
the Image Adjust Menu.
COLOR BALANCE
> Hue 100
Saturation 0
Reset All
TIMING ADJUST
> Auto Config
Sampling 1:1
Sample Phase 0
H Total 1344
H Position 296
H Active 1024
V Total [806]
V Position 35
V Active 768