Instruction manual

ACS-2048 • User’s Guide 45

4. Operation

Using the Main Menu

Please note:

• If a source type is chosen and a correct signal cannot be detected, the Input

Format field (in the Input Menu and the Status Menu) indicates “Invalid Signal.”

• For inputs 2 and 3, analog signals can be connected to the ACS-2048 using a

customer-supplied DVI to HD-15 adaptor.

`çäçêëé~ÅÉ

From the Input Menu, select Colorspace to change the color space for the selected input.

Values depend on the selected input:

• For input 1: [SMPTE]

• For input 2: RGB, SMPTE

• For input 3: RGB, SMPTE

• For input 4: RGB, SMPTE

• For input 5: RGB, SMPTE

• For input 6: [SMPTE]

• For input 7: [SMPTE]

Please note:

• The default selection for YP

or YUV is SMPTE. In Appendix A, refer to the

“Input Format Table” section on page 89 for information on the formats that are

RGB, SMPTE or both. When both RGB and SMPTE are listed, the first item in the

list is the default.

• When the input is analog (including CVBS, Y/C or DVI), you can select between

RGB and SMPTE.

• When the following formats are detected as SD/SDI or HD/SDI, only [SMPTE] is

shown, and this color space is unchangeable.

~ NTSC (480i)

~ PAL (576i)

~ 1280x720p @50

~ 1280x720p @59.94

~ 1280x720p @60

~ 1920x1080p @23.98

~ 1920x1080p @24

~ 1920x1080p @25

~ 1920x1080p @29.97

~ 1920x1080p @30

~ 1920x1080sF@23.98

~ 1920x1080sF@24

~ 1920x1080i @50

~ 1920x1080i @59.94

~ 1920x1080i @60