Instruction manual

ACS-2048 • User’s Guide 39
4. Operation
Quick Function Reference
Change image contrast Contrast 47
Change image processing Processing
50
Change image timing Timing Adjust
48
Change input colorspace Colorspace
45
Change input format Input Format
44
Change input type Type
44
Change output format Output Format
53
Change output gamma Gamma
54
Change output mode (8-bit, 10-bit, 12-bit) Output Mode
53
Change sampling (1:1, Oversample) Timing Adjust
48
Change test pattern type Test Pattern
54
Change transition time Trans Time
57
Change user preferences User Preference
63
Check system temperature Temperature
62
Configure Ethernet network Ethernet
58
Crop the image Image Adjust
46
Delete input configuration Delete Config
52
Display software version Software Version
67
Display system status Status Menu
66
Enable or disable all input select User Preference
63
Enable or disable auto input save User Preference
63
Enable or disable DHCP Ethernet
58
Enable or disable menu context mode User Preference
63
Enable or disable raster box Test Pattern
54
Enable or disable test patterns Test Pattern
54
Enable or disable Auto Acquire mode In Auto Acquire
42
Equalize DVI cables DVI Cable Equalization
62
Lock out front panel Front Panel Lockout
71
Navigate the Menu Tree Menu Tree
35
Pan the image Image Adjust
46
Perform factory reset Factory Reset
67
Perform quick setup and operations Quick Setup and Operations
33
Program EDID EDID DVI Input Format
60
Table 4-1. ACS-2048 Quick Function Reference Table (Continued)
How to: Use the Following Section: Page