Instruction manual

32 ACS-2048 • User’s Guide
4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the ACS-2048:
• The front panel is ideal for all basic system configurations. Available controls
include the Display Section and the buttons in the Inputs Section.
• The ACS-2048 can also be controlled remotely via Ethernet. All system
commands are available. Typically, remote commands are used to switch inputs
from the Barco projector’s “Communicator” touch screen, but more advanced
interfaces can be configured using the protocol. Refer to Appendix B
on page 93
for additional details.
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the ACS-2048, locate the power switch on the back of the
chassis, and turn the power ON. While the system is initializing, the following messages
are displayed:
Figure 4-1. System initialization message 1
Figure 4-2. System initialization message 2
Figure 4-3. System initialization message 3
ACS-2048
Barco
Initializing...
Program Loading
please wait...
Transferring to
main program...