Instruction manual

ACS-2048 • User’s Guide 15
NK==fåíêçÇìÅíáçå
Connectivity Diagram
`çååÉÅíáîáíó=aá~Öê~ã
The figure below illustrates a basic ACS-2048 system.
Figure 1-1. Block diagram, ACS-2048 system
In the diagram:
• Your selected media server connects to the Barco projector via dual-link HD-SDI.
• The ACS-2048 connects to the Barco projector via single link 8-bit DVI or twin-link
10/12-bit DVI.
• Eight dedicated inputs are available:
~ 1 x SDI or HD-SDI, for serial digital or HD sources
~ 2 x DVI, for computer sources. Note that these DVI connectors also
support analog RGB inputs.
~ 2 x Analog, for a variety of YUV and RGBHV sources
~ 1 x composite, for composite NTSC or PAL video sources (e.g., DVD)
~ 1 x S-Video, for encoded NTSC or PAL Y/C or S-Video sources
~ 1 x Aux (not currently implemented)
In Chapter 2, refer to the “Inputs Section
” heading on page 21 for details on all inputs.
Barco DP Series
Projector
HD-SDI
DVI
Media Server
ACS-2048
HD-SDI / SDI
DVI
DVI
Analog
Analog
Composite
S-Video
Option