Instruction manual

102 ACS-2048 • User’s Guide
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
Remote Commands
-t (type):
•1 - H Ramp
• 2 - V Ramp
• 3 - 100% Col Bars
• 4 - 16x16 Grid
• 5 - 32x32 Grid
•6 - Burst
• 7 - 75% Col bars
•8 - 50% Gray
• 9 - Gray Steps 1
• 10 - Gray Steps 2
• Query Format: OTPT -o (output) -?
• Query Response: OTPT -o (output) - t (type) --min 1 -- max 10
• List Format: OTPT -o (output) --list
• List Response:
1: "H Ramp"
2: " V Ramp"
3: "100% Col Bars"
4: "16x16 Grid"
5: "32x32 Grid"
6: "Burst"
7: "75% Col bars"
8: "50% Gray"
9: "Gray Steps 1"
10: "Gray Steps 2"
lo_j=
• Description: Output Raster Box Mode
• Command Format: ORBM -o (output) -m (mode)
• Parameters:
-o (output): 1 - DVI
-m (mode): 0-off, 1-on
• Query Format: ORBM -o (output) -?
• Query Response: ORBM -o (output) -m (mode) --min 0 -- max 1
ljlab===
• Description: Set the output mode
• Command Format: OMODE -o (output) -w (width)
• Parameters:
-o (output): 1 - DVI
-w (width): 0 - 8 bits, 1 - 10 bits, 2 - 12 bits (Default: 10 bits)