User manual

CHAPTER 4
Fixture Programming
intellaspot
TM
XT-1 User Manual 45
Static Color Function
The Static Color Function
parameter determines how the
fixed color wheel moves and can
be enabled in either full speed
(controller crossfading the wheel
positions), or MSpeed (MSpeed
control of the wheel motor).
For more information on MSpeed,
see
MSpeed (Motor Speed) on
page 55.
Static Color Position
Static Color Position parameter controls fixed color wheel positioning. The Static Color Function
setting you choose determines how the individual color mixing wheels can move.
Static Color
Function
Parameter Options
Description
Indexed
Allows the color wheel to take the quickest path and snap to the chosen
whole or half color
Forward Spin Spins the fixed color wheel forward at variable speeds
Reverse Spin Spins the fixed color wheel in reverse at variable speeds
Continuous
Moves to any point on the color wheel to allow a smaller “step” between color
wheel positions for color crossfades
Fast Scan Oscillates the fixed color wheel at a factory-determined range and speed
Random Selects random whole color positions at variable speeds
Blink Closes then reopens the shutter between indexed color changes
Color Function
Setting
Static Color Position Options
Indexed or Scan Mode
Position the wheel at the center of a color wedge or halfway between two
adjacent colors from Open (white) to Open
Spin, Blink or Random
Mode
Stop wheel motion
Adjust the wheel motion from slowest to fastest
Continuous Mode Position the wheel at any point from 0–360°
Red/Pink
White/Red
Pink/GreenGreen/Amber
Amber/Blue
Blue/White
Open
(White)
Red
Pink
Amber
Blue
Green