User manual

CHAPTER 4
Fixture Programming
42 intellaspot
TM
XT-1 User Manual
intellaspot DMX Protocol
The intellaspot fixture uses 39 channels of a standard DMX512 link to control motion, wheel
functions, Soft edge, focus, zoom, iris, shutter and lamp function. Factory installed macros use
Internal Effects™ for an additional control option.
These parameters are described in the following sections.
Note: All DMX values indicated in the detailed parameter descriptions are in
decimal units.
Pan and Tilt Parameters
The intellaspot fixture has a 540° pan range and a 270° tilt range. Two DMX channels provide 16-
bit adjustment to a fraction of a degree for pan and tilt position.
MSpeed values control the pan and tilt motion for intellaspot fixtures by default, see MSpeed
(Motor Speed) on page 55. To control the Pan and Tilt parameters with DMX controller crossfading,
set Pan/Tilt MSpeed off in the Control parameter (see Control Parameter on page 57).
Channel Function Channel Function
1
Pan
22 Effect Function
2 23
Effect Rotate
3
Tilt
24
4 25 Animation Function
5 Color Mix Function 26 Animation Rotate
6 Cyan 27 Soft Edge
7 Magenta 28 Focus Function
8 Yellow 29
Focus
9 CTO 30
10 Static Color Function 31
Zoom
11 Static Color Position 32
12 Gobo 1 Function 33 Iris
13 Gobo 1 Position 34 Shutter/Lamp Function
14 Gobo 1 Rotate Function 35 Shutter
15
Gobo1 Rotate
36 Dim
16 37 MSpeed
17 Gobo 2 Function 38 Macro
18 Gobo 2 Position 39 Control
19 Gobo 2 Rotate Function 40* Indigo Highlighter Function
20
Gobo 2 Rotate
41* Indigo Hightlighter Dim
21
* Channels not included in reduced protocol